Java™ Platform
Standard Ed. 6

javax.sql
Interface RowSet

All Superinterfaces:
ResultSet, Wrapper
All Known Subinterfaces:
CachedRowSet, FilteredRowSet, JdbcRowSet, JoinRowSet, SyncResolver, WebRowSet

public interface RowSet
extends ResultSet

The interface that adds support to the JDBC API for the JavaBeansTM component model. A rowset, which can be used as a JavaBeans component in a visual Bean development environment, can be created and configured at design time and executed at run time.

The RowSet interface provides a set of JavaBeans properties that allow a RowSet instance to be configured to connect to a JDBC data source and read some data from the data source. A group of setter methods (setInt, setBytes, setString, and so on) provide a way to pass input parameters to a rowset's command property. This command is the SQL query the rowset uses when it gets its data from a relational database, which is generally the case.

The RowSet interface supports JavaBeans events, allowing other components in an application to be notified when an event occurs on a rowset, such as a change in its value.

The RowSet interface is unique in that it is intended to be implemented using the rest of the JDBC API. In other words, a RowSet implementation is a layer of software that executes "on top" of a JDBC driver. Implementations of the RowSet interface can be provided by anyone, including JDBC driver vendors who want to provide a RowSet implementation as part of their JDBC products.

A RowSet object may make a connection with a data source and maintain that connection throughout its life cycle, in which case it is called a connected rowset. A rowset may also make a connection with a data source, get data from it, and then close the connection. Such a rowset is called a disconnected rowset. A disconnected rowset may make changes to its data while it is disconnected and then send the changes back to the original source of the data, but it must reestablish a connection to do so.

A disconnected rowset may have a reader (a RowSetReader object) and a writer (a RowSetWriter object) associated with it. The reader may be implemented in many different ways to populate a rowset with data, including getting data from a non-relational data source. The writer can also be implemented in many different ways to propagate changes made to the rowset's data back to the underlying data source.

Rowsets are easy to use. The RowSet interface extends the standard java.sql.ResultSet interface. The RowSetMetaData interface extends the java.sql.ResultSetMetaData interface. Thus, developers familiar with the JDBC API will have to learn a minimal number of new APIs to use rowsets. In addition, third-party software tools that work with JDBC ResultSet objects will also easily be made to work with rowsets.

Since:
1.4

Field Summary
 
Fields inherited from interface java.sql.ResultSet
CLOSE_CURSORS_AT_COMMIT, CONCUR_READ_ONLY, CONCUR_UPDATABLE, FETCH_FORWARD, FETCH_REVERSE, FETCH_UNKNOWN, HOLD_CURSORS_OVER_COMMIT, TYPE_FORWARD_ONLY, TYPE_SCROLL_INSENSITIVE, TYPE_SCROLL_SENSITIVE
 
Method Summary
 void addRowSetListener(RowSetListener listener)
          Registers the given listener so that it will be notified of events that occur on this RowSet object.
 void clearParameters()
          Clears the parameters set for this RowSet object's command.
 void execute()
          Fills this RowSet object with data.
 String getCommand()
          Retrieves this RowSet object's command property.
 String getDataSourceName()
          Retrieves the logical name that identifies the data source for this RowSet object.
 boolean getEscapeProcessing()
          Retrieves whether escape processing is enabled for this RowSet object.
 int getMaxFieldSize()
          Retrieves the maximum number of bytes that may be returned for certain column values.
 int getMaxRows()
          Retrieves the maximum number of rows that this RowSet object can contain.
 String getPassword()
          Retrieves the password used to create a database connection.
 int getQueryTimeout()
          Retrieves the maximum number of seconds the driver will wait for a statement to execute.
 int getTransactionIsolation()
          Retrieves the transaction isolation level set for this RowSet object.
 Map<String,Class<?>> getTypeMap()
          Retrieves the Map object associated with this RowSet object, which specifies the custom mapping of SQL user-defined types, if any.
 String getUrl()
          Retrieves the url property this RowSet object will use to create a connection if it uses the DriverManager instead of a DataSource object to establish the connection.
 String getUsername()
          Retrieves the username used to create a database connection for this RowSet object.
 boolean isReadOnly()
          Retrieves whether this RowSet object is read-only.
 void removeRowSetListener(RowSetListener listener)
          Removes the specified listener from the list of components that will be notified when an event occurs on this RowSet object.
 void setArray(int i, Array x)
          Sets the designated parameter in this RowSet object's command with the given Array value.
 void setAsciiStream(int parameterIndex, InputStream x)
          Sets the designated parameter in this RowSet object's command to the given input stream.
 void setAsciiStream(int parameterIndex, InputStream x, int length)
          Sets the designated parameter in this RowSet object's command to the given java.io.InputStream value.
 void setAsciiStream(String parameterName, InputStream x)
          Sets the designated parameter to the given input stream.
 void setAsciiStream(String parameterName, InputStream x, int length)
          Sets the designated parameter to the given input stream, which will have the specified number of bytes.
 void setBigDecimal(int parameterIndex, BigDecimal x)
          Sets the designated parameter in this RowSet object's command to the given java.math.BigDeciaml value.
 void setBigDecimal(String parameterName, BigDecimal x)
          Sets the designated parameter to the given java.math.BigDecimal value.
 void setBinaryStream(int parameterIndex, InputStream x)
          Sets the designated parameter in this RowSet object's command to the given input stream.
 void setBinaryStream(int parameterIndex, InputStream x, int length)
          Sets the designated parameter in this RowSet object's command to the given java.io.InputStream value.
 void setBinaryStream(String parameterName, InputStream x)
          Sets the designated parameter to the given input stream.
 void setBinaryStream(String parameterName, InputStream x, int length)
          Sets the designated parameter to the given input stream, which will have the specified number of bytes.
 void setBlob(int i, Blob x)
          Sets the designated parameter in this RowSet object's command with the given Blob value.
 void setBlob(int parameterIndex, InputStream inputStream)
          Sets the designated parameter to a InputStream object.
 void setBlob(int parameterIndex, InputStream inputStream, long length)
          Sets the designated parameter to a InputStream object.
 void setBlob(String parameterName, Blob x)
          Sets the designated parameter to the given java.sql.Blob object.
 void setBlob(String parameterName, InputStream inputStream)
          Sets the designated parameter to a InputStream object.
 void setBlob(String parameterName, InputStream inputStream, long length)
          Sets the designated parameter to a InputStream object.
 void setBoolean(int parameterIndex, boolean x)
          Sets the designated parameter in this RowSet object's command to the given Java boolean value.
 void setBoolean(String parameterName, boolean x)
          Sets the designated parameter to the given Java boolean value.
 void setByte(int parameterIndex, byte x)
          Sets the designated parameter in this RowSet object's command to the given Java byte value.
 void setByte(String parameterName, byte x)
          Sets the designated parameter to the given Java byte value.
 void setBytes(int parameterIndex, byte[] x)
          Sets the designated parameter in this RowSet object's command to the given Java array of byte values.
 void setBytes(String parameterName, byte[] x)
          Sets the designated parameter to the given Java array of bytes.
 void setCharacterStream(int parameterIndex, Reader reader)
          Sets the designated parameter in this RowSet object's command to the given Reader object.
 void setCharacterStream(int parameterIndex, Reader reader, int length)
          Sets the designated parameter in this RowSet object's command to the given java.io.Reader value.
 void setCharacterStream(String parameterName, Reader reader)
          Sets the designated parameter to the given Reader object.
 void setCharacterStream(String parameterName, Reader reader, int length)
          Sets the designated parameter to the given Reader object, which is the given number of characters long.
 void setClob(int i, Clob x)
          Sets the designated parameter in this RowSet object's command with the given Clob value.
 void setClob(int parameterIndex, Reader reader)
          Sets the designated parameter to a Reader object.
 void setClob(int parameterIndex, Reader reader, long length)
          Sets the designated parameter to a Reader object.
 void setClob(String parameterName, Clob x)
          Sets the designated parameter to the given java.sql.Clob object.
 void setClob(String parameterName, Reader reader)
          Sets the designated parameter to a Reader object.
 void setClob(String parameterName, Reader reader, long length)
          Sets the designated parameter to a Reader object.
 void setCommand(String cmd)
          Sets this RowSet object's command property to the given SQL query.
 void setConcurrency(int concurrency)
          Sets the concurrency of this RowSet object to the given concurrency level.
 void setDataSourceName(String name)
          Sets the data source name property for this RowSet object to the given String.
 void setDate(int parameterIndex, Date x)
          Sets the designated parameter in this RowSet object's command to the given java.sql.Date value.
 void setDate(int parameterIndex, Date x, Calendar cal)
          Sets the designated parameter in this RowSet object's command with the given java.sql.Date value.
 void setDate(String parameterName, Date x)
          Sets the designated parameter to the given java.sql.Date value using the default time zone of the virtual machine that is running the application.
 void setDate(String parameterName, Date x, Calendar cal)
          Sets the designated parameter to the given java.sql.Date value, using the given Calendar object.
 void setDouble(int parameterIndex, double x)
          Sets the designated parameter in this RowSet object's command to the given Java double value.
 void setDouble(String parameterName, double x)
          Sets the designated parameter to the given Java double value.
 void setEscapeProcessing(boolean enable)
          Sets escape processing for this RowSet object on or off.
 void setFloat(int parameterIndex, float x)
          Sets the designated parameter in this RowSet object's command to the given Java float value.
 void setFloat(String parameterName, float x)
          Sets the designated parameter to the given Java float value.
 void setInt(int parameterIndex, int x)
          Sets the designated parameter in this RowSet object's command to the given Java int value.
 void setInt(String parameterName, int x)
          Sets the designated parameter to the given Java int value.
 void setLong(int parameterIndex, long x)
          Sets the designated parameter in this RowSet object's command to the given Java long value.
 void setLong(String parameterName, long x)
          Sets the designated parameter to the given Java long value.
 void setMaxFieldSize(int max)
          Sets the maximum number of bytes that can be returned for a column value to the given number of bytes.
 void setMaxRows(int max)
          Sets the maximum number of rows that this RowSet object can contain to the specified number.
 void setNCharacterStream(int parameterIndex, Reader value)
          Sets the designated parameter in this RowSet object's command to a Reader object.
 void setNCharacterStream(int parameterIndex, Reader value, long length)
          Sets the designated parameter to a Reader object.
 void setNCharacterStream(String parameterName, Reader value)
          Sets the designated parameter to a Reader object.
 void setNCharacterStream(String parameterName, Reader value, long length)
          Sets the designated parameter to a Reader object.
 void setNClob(int parameterIndex, NClob value)
          Sets the designated parameter to a java.sql.NClob object.
 void setNClob(int parameterIndex, Reader reader)
          Sets the designated parameter to a Reader object.
 void setNClob(int parameterIndex, Reader reader, long length)
          Sets the designated parameter to a Reader object.
 void setNClob(String parameterName, NClob value)
          Sets the designated parameter to a java.sql.NClob object.
 void setNClob(String parameterName, Reader reader)
          Sets the designated parameter to a Reader object.
 void setNClob(String parameterName, Reader reader, long length)
          Sets the designated parameter to a Reader object.
 void setNString(int parameterIndex, String value)
          Sets the designated paramter to the given String object.
 void setNString(String parameterName, String value)
          Sets the designated paramter to the given String object.
 void setNull(int parameterIndex, int sqlType)
          Sets the designated parameter in this RowSet object's SQL command to SQL NULL.
 void setNull(int paramIndex, int sqlType, String typeName)
          Sets the designated parameter in this RowSet object's SQL command to SQL NULL.
 void setNull(String parameterName, int sqlType)
          Sets the designated parameter to SQL NULL.
 void setNull(String parameterName, int sqlType, String typeName)
          Sets the designated parameter to SQL NULL.
 void setObject(int parameterIndex, Object x)
          Sets the designated parameter in this RowSet object's command with a Java Object.
 void setObject(int parameterIndex, Object x, int targetSqlType)
          Sets the designated parameter in this RowSet object's command with a Java Object.
 void setObject(int parameterIndex, Object x, int targetSqlType, int scaleOrLength)
          Sets the designated parameter in this RowSet object's command with the given Java Object.
 void setObject(String parameterName, Object x)
          Sets the value of the designated parameter with the given object.
 void setObject(String parameterName, Object x, int targetSqlType)
          Sets the value of the designated parameter with the given object.
 void setObject(String parameterName, Object x, int targetSqlType, int scale)
          Sets the value of the designated parameter with the given object.
 void setPassword(String password)
          Sets the database password for this RowSet object to the given String.
 void setQueryTimeout(int seconds)
          Sets the maximum time the driver will wait for a statement to execute to the given number of seconds.
 void setReadOnly(boolean value)
          Sets whether this RowSet object is read-only to the given boolean.
 void setRef(int i, Ref x)
          Sets the designated parameter in this RowSet object's command with the given Ref value.
 void setRowId(int parameterIndex, RowId x)
          Sets the designated parameter to the given java.sql.RowId object.
 void setRowId(String parameterName, RowId x)
          Sets the designated parameter to the given java.sql.RowId object.
 void setShort(int parameterIndex, short x)
          Sets the designated parameter in this RowSet object's command to the given Java short value.
 void setShort(String parameterName, short x)
          Sets the designated parameter to the given Java short value.
 void setSQLXML(int parameterIndex, SQLXML xmlObject)
          Sets the designated parameter to the given java.sql.SQLXML object.
 void setSQLXML(String parameterName, SQLXML xmlObject)
          Sets the designated parameter to the given java.sql.SQLXML object.
 void setString(int parameterIndex, String x)
          Sets the designated parameter in this RowSet object's command to the given Java String value.
 void setString(String parameterName, String x)
          Sets the designated parameter to the given Java String value.
 void setTime(int parameterIndex, Time x)
          Sets the designated parameter in this RowSet object's command to the given java.sql.Time value.
 void setTime(int parameterIndex, Time x, Calendar cal)
          Sets the designated parameter in this RowSet object's command with the given java.sql.Time value.
 void setTime(String parameterName, Time x)
          Sets the designated parameter to the given java.sql.Time value.
 void setTime(String parameterName, Time x, Calendar cal)
          Sets the designated parameter to the given java.sql.Time value, using the given Calendar object.
 void setTimestamp(int parameterIndex, Timestamp x)
          Sets the designated parameter in this RowSet object's command to the given java.sql.Timestamp value.
 void setTimestamp(int parameterIndex, Timestamp x, Calendar cal)
          Sets the designated parameter in this RowSet object's command with the given java.sql.Timestamp value.
 void setTimestamp(String parameterName, Timestamp x)
          Sets the designated parameter to the given java.sql.Timestamp value.
 void setTimestamp(String parameterName, Timestamp x, Calendar cal)
          Sets the designated parameter to the given java.sql.Timestamp value, using the given Calendar object.
 void setTransactionIsolation(int level)
          Sets the transaction isolation level for this RowSet obejct.
 void setType(int type)
          Sets the type of this RowSet object to the given type.
 void setTypeMap(Map<String,Class<?>> map)
          Installs the given java.util.Map object as the default type map for this RowSet object.
 void setURL(int parameterIndex, URL x)
          Sets the designated parameter to the given java.net.URL value.
 void setUrl(String url)
          Sets the URL this RowSet object will use when it uses the DriverManager to create a connection.
 void setUsername(String name)
          Sets the username property for this RowSet object to the given String.
 
Methods inherited from interface java.sql.ResultSet
absolute, afterLast, beforeFirst, cancelRowUpdates, clearWarnings, close, deleteRow, findColumn, first, getArray, getArray, getAsciiStream, getAsciiStream, getBigDecimal, getBigDecimal, getBigDecimal, getBigDecimal, getBinaryStream, getBinaryStream, getBlob, getBlob, getBoolean, getBoolean, getByte, getByte, getBytes, getBytes, getCharacterStream, getCharacterStream, getClob, getClob, getConcurrency, getCursorName, getDate, getDate, getDate, getDate, getDouble, getDouble, getFetchDirection, getFetchSize, getFloat, getFloat, getHoldability, getInt, getInt, getLong, getLong, getMetaData, getNCharacterStream, getNCharacterStream, getNClob, getNClob, getNString, getNString, getObject, getObject, getObject, getObject, getRef, getRef, getRow, getRowId, getRowId, getShort, getShort, getSQLXML, getSQLXML, getStatement, getString, getString, getTime, getTime, getTime, getTime, getTimestamp, getTimestamp, getTimestamp, getTimestamp, getType, getUnicodeStream, getUnicodeStream, getURL, getURL, getWarnings, insertRow, isAfterLast, isBeforeFirst, isClosed, isFirst, isLast, last, moveToCurrentRow, moveToInsertRow, next, previous, refreshRow, relative, rowDeleted, rowInserted, rowUpdated, setFetchDirection, setFetchSize, updateArray, updateArray, updateAsciiStream, updateAsciiStream, updateAsciiStream, updateAsciiStream, updateAsciiStream, updateAsciiStream, updateBigDecimal, updateBigDecimal, updateBinaryStream, updateBinaryStream, updateBinaryStream, updateBinaryStream, updateBinaryStream, updateBinaryStream, updateBlob, updateBlob, updateBlob, updateBlob, updateBlob, updateBlob, updateBoolean, updateBoolean, updateByte, updateByte, updateBytes, updateBytes, updateCharacterStream, updateCharacterStream, updateCharacterStream, updateCharacterStream, updateCharacterStream, updateCharacterStream, updateClob, updateClob, updateClob, updateClob, updateClob, updateClob, updateDate, updateDate, updateDouble, updateDouble, updateFloat, updateFloat, updateInt, updateInt, updateLong, updateLong, updateNCharacterStream, updateNCharacterStream, updateNCharacterStream, updateNCharacterStream, updateNClob, updateNClob, updateNClob, updateNClob, updateNClob, updateNClob, updateNString, updateNString, updateNull, updateNull, updateObject, updateObject, updateObject, updateObject, updateRef, updateRef, updateRow, updateRowId, updateRowId, updateShort, updateShort, updateSQLXML, updateSQLXML, updateString, updateString, updateTime, updateTime, updateTimestamp, updateTimestamp, wasNull
 
Methods inherited from interface java.sql.Wrapper
isWrapperFor, unwrap
 

Method Detail

getUrl

String getUrl()
              throws SQLException
Retrieves the url property this RowSet object will use to create a connection if it uses the DriverManager instead of a DataSource object to establish the connection. The default value is null.

Returns:
a string url
Throws:
SQLException - if a database access error occurs
See Also:
setUrl(java.lang.String)

setUrl

void setUrl(String url)
            throws SQLException
Sets the URL this RowSet object will use when it uses the DriverManager to create a connection. Setting this property is optional. If a URL is used, a JDBC driver that accepts the URL must be loaded before the rowset is used to connect to a database. The rowset will use the URL internally to create a database connection when reading or writing data. Either a URL or a data source name is used to create a connection, whichever was set to non null value most recently.

Parameters:
url - a string value; may be null
Throws:
SQLException - if a database access error occurs
See Also:
getUrl()

getDataSourceName

String getDataSourceName()
Retrieves the logical name that identifies the data source for this RowSet object.

Returns:
a data source name
See Also:
setDataSourceName(java.lang.String), setUrl(java.lang.String)

setDataSourceName

void setDataSourceName(String name)
                       throws SQLException
Sets the data source name property for this RowSet object to the given String.

The value of the data source name property can be used to do a lookup of a DataSource object that has been registered with a naming service. After being retrieved, the DataSource object can be used to create a connection to the data source that it represents.

Parameters:
name - the logical name of the data source for this RowSet object; may be null
Throws:
SQLException - if a database access error occurs
See Also:
getDataSourceName()

getUsername

String getUsername()
Retrieves the username used to create a database connection for this RowSet object. The username property is set at run time before calling the method execute. It is not usually part of the serialized state of a RowSet object.

Returns:
the username property
See Also:
setUsername(java.lang.String)

setUsername

void setUsername(String name)
                 throws SQLException
Sets the username property for this RowSet object to the given String.

Parameters:
name - a user name
Throws:
SQLException - if a database access error occurs
See Also:
getUsername()

getPassword

String getPassword()
Retrieves the password used to create a database connection. The password property is set at run time before calling the method execute. It is not usually part of the serialized state of a RowSet object.

Returns:
the password for making a database connection
See Also:
setPassword(java.lang.String)

setPassword

void setPassword(String password)
                 throws SQLException
Sets the database password for this RowSet object to the given String.

Parameters:
password - the password string
Throws:
SQLException - if a database access error occurs
See Also:
getPassword()

getTransactionIsolation

int getTransactionIsolation()
Retrieves the transaction isolation level set for this RowSet object.

Returns:
the transaction isolation level; one of Connection.TRANSACTION_READ_UNCOMMITTED, Connection.TRANSACTION_READ_COMMITTED, Connection.TRANSACTION_REPEATABLE_READ, or Connection.TRANSACTION_SERIALIZABLE
See Also:
setTransactionIsolation(int)

setTransactionIsolation

void setTransactionIsolation(int level)
                             throws SQLException
Sets the transaction isolation level for this RowSet obejct.

Parameters:
level - the transaction isolation level; one of Connection.TRANSACTION_READ_UNCOMMITTED, Connection.TRANSACTION_READ_COMMITTED, Connection.TRANSACTION_REPEATABLE_READ, or Connection.TRANSACTION_SERIALIZABLE
Throws:
SQLException - if a database access error occurs
See Also:
getTransactionIsolation()

getTypeMap

Map<String,Class<?>> getTypeMap()
                                throws SQLException
Retrieves the Map object associated with this RowSet object, which specifies the custom mapping of SQL user-defined types, if any. The default is for the type map to be empty.

Returns:
a java.util.Map object containing the names of SQL user-defined types and the Java classes to which they are to be mapped
Throws:
SQLException - if a database access error occurs
See Also:
setTypeMap(java.util.Map>)

setTypeMap

void setTypeMap(Map<String,Class<?>> map)
                throws SQLException
Installs the given java.util.Map object as the default type map for this RowSet object. This type map will be used unless another type map is supplied as a method parameter.

Parameters:
map - a java.util.Map object containing the names of SQL user-defined types and the Java classes to which they are to be mapped
Throws:
SQLException - if a database access error occurs
See Also:
getTypeMap()

getCommand

String getCommand()
Retrieves this RowSet object's command property. The command property contains a command string, which must be an SQL query, that can be executed to fill the rowset with data. The default value is null.

Returns:
the command string; may be null
See Also:
setCommand(java.lang.String)

setCommand

void setCommand(String cmd)
                throws SQLException
Sets this RowSet object's command property to the given SQL query. This property is optional when a rowset gets its data from a data source that does not support commands, such as a spreadsheet.

Parameters:
cmd - the SQL query that will be used to get the data for this RowSet object; may be null
Throws:
SQLException - if a database access error occurs
See Also:
getCommand()

isReadOnly

boolean isReadOnly()
Retrieves whether this RowSet object is read-only. If updates are possible, the default is for a rowset to be updatable.

Attempts to update a read-only rowset will result in an SQLException being thrown.

Returns:
true if this RowSet object is read-only; false if it is updatable
See Also:
setReadOnly(boolean)

setReadOnly

void setReadOnly(boolean value)
                 throws SQLException
Sets whether this RowSet object is read-only to the given boolean.

Parameters:
value - true if read-only; false if updatable
Throws:
SQLException - if a database access error occurs
See Also:
isReadOnly()

getMaxFieldSize

int getMaxFieldSize()
                    throws SQLException
Retrieves the maximum number of bytes that may be returned for certain column values. This limit applies only to BINARY, VARBINARY, LONGVARBINARYBINARY, CHAR, VARCHAR, LONGVARCHAR, NCHAR and NVARCHAR columns. If the limit is exceeded, the excess data is silently discarded.

Returns:
the current maximum column size limit; zero means that there is no limit
Throws:
SQLException - if a database access error occurs
See Also:
setMaxFieldSize(int)

setMaxFieldSize

void setMaxFieldSize(int max)
                     throws SQLException
Sets the maximum number of bytes that can be returned for a column value to the given number of bytes. This limit applies only to BINARY, VARBINARY, LONGVARBINARYBINARY, CHAR, VARCHAR, LONGVARCHAR, NCHAR and NVARCHAR columns. If the limit is exceeded, the excess data is silently discarded. For maximum portability, use values greater than 256.

Parameters:
max - the new max column size limit in bytes; zero means unlimited
Throws:
SQLException - if a database access error occurs
See Also:
getMaxFieldSize()

getMaxRows

int getMaxRows()
               throws SQLException
Retrieves the maximum number of rows that this RowSet object can contain. If the limit is exceeded, the excess rows are silently dropped.

Returns:
the current maximum number of rows that this RowSet object can contain; zero means unlimited
Throws:
SQLException - if a database access error occurs
See Also:
setMaxRows(int)

setMaxRows

void setMaxRows(int max)
                throws SQLException
Sets the maximum number of rows that this RowSet object can contain to the specified number. If the limit is exceeded, the excess rows are silently dropped.

Parameters:
max - the new maximum number of rows; zero means unlimited
Throws:
SQLException - if a database access error occurs
See Also:
getMaxRows()

getEscapeProcessing

boolean getEscapeProcessing()
                            throws SQLException
Retrieves whether escape processing is enabled for this RowSet object. If escape scanning is enabled, which is the default, the driver will do escape substitution before sending an SQL statement to the database.

Returns:
true if escape processing is enabled; false if it is disabled
Throws:
SQLException - if a database access error occurs
See Also:
setEscapeProcessing(boolean)

setEscapeProcessing

void setEscapeProcessing(boolean enable)
                         throws SQLException
Sets escape processing for this RowSet object on or off. If escape scanning is on (the default), the driver will do escape substitution before sending an SQL statement to the database.

Parameters:
enable - true to enable escape processing; false to disable it
Throws:
SQLException - if a database access error occurs
See Also:
getEscapeProcessing()

getQueryTimeout

int getQueryTimeout()
                    throws SQLException
Retrieves the maximum number of seconds the driver will wait for a statement to execute. If this limit is exceeded, an SQLException is thrown.

Returns:
the current query timeout limit in seconds; zero means unlimited
Throws:
SQLException - if a database access error occurs
See Also:
setQueryTimeout(int)

setQueryTimeout

void setQueryTimeout(int seconds)
                     throws SQLException
Sets the maximum time the driver will wait for a statement to execute to the given number of seconds. If this limit is exceeded, an SQLException is thrown.

Parameters:
seconds - the new query timeout limit in seconds; zero means that there is no limit
Throws:
SQLException - if a database access error occurs
See Also:
getQueryTimeout()

setType

void setType(int type)
             throws SQLException
Sets the type of this RowSet object to the given type. This method is used to change the type of a rowset, which is by default read-only and non-scrollable.

Parameters:
type - one of the ResultSet constants specifying a type: ResultSet.TYPE_FORWARD_ONLY, ResultSet.TYPE_SCROLL_INSENSITIVE, or ResultSet.TYPE_SCROLL_SENSITIVE
Throws:
SQLException - if a database access error occurs
See Also:
ResultSet.getType()

setConcurrency

void setConcurrency(int concurrency)
                    throws SQLException
Sets the concurrency of this RowSet object to the given concurrency level. This method is used to change the concurrency level of a rowset, which is by default ResultSet.CONCUR_READ_ONLY

Parameters:
concurrency - one of the ResultSet constants specifying a concurrency level: ResultSet.CONCUR_READ_ONLY or ResultSet.CONCUR_UPDATABLE
Throws:
SQLException - if a database access error occurs
See Also:
ResultSet.getConcurrency()

setNull

void setNull(int parameterIndex,
             int sqlType)
             throws SQLException
Sets the designated parameter in this RowSet object's SQL command to SQL NULL.

Note: You must specify the parameter's SQL type.

Parameters:
parameterIndex - the first parameter is 1, the second is 2, ...
sqlType - a SQL type code defined by java.sql.Types
Throws:
SQLException - if a database access error occurs

setNull

void setNull(String parameterName,
             int sqlType)
             throws SQLException
Sets the designated parameter to SQL NULL.

Note: You must specify the parameter's SQL type.

Parameters:
parameterName - the name of the parameter
sqlType - the SQL type code defined in java.sql.Types
Throws:
SQLException - if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.4

setNull

void setNull(int paramIndex,
             int sqlType,
             String typeName)
             throws SQLException
Sets the designated parameter in this RowSet object's SQL command to SQL NULL. This version of the method setNull should be used for SQL user-defined types (UDTs) and REF type parameters. Examples of UDTs include: STRUCT, DISTINCT, JAVA_OBJECT, and named array types.

Note: To be portable, applications must give the SQL type code and the fully qualified SQL type name when specifying a NULL UDT or REF parameter. In the case of a UDT, the name is the type name of the parameter itself. For a REF parameter, the name is the type name of the referenced type. If a JDBC driver does not need the type code or type name information, it may ignore it. Although it is intended for UDT and REF parameters, this method may be used to set a null parameter of any JDBC type. If the parameter does not have a user-defined or REF type, the typeName parameter is ignored.

Parameters:
paramIndex - the first parameter is 1, the second is 2, ...
sqlType - a value from java.sql.Types
typeName - the fully qualified name of an SQL UDT or the type name of the SQL structured type being referenced by a REF type; ignored if the parameter is not a UDT or REF type
Throws:
SQLException - if a database access error occurs

setNull

void setNull(String parameterName,
             int sqlType,
             String typeName)
             throws SQLException
Sets the designated parameter to SQL NULL. This version of the method setNull should be used for user-defined types and REF type parameters. Examples of user-defined types include: STRUCT, DISTINCT, JAVA_OBJECT, and named array types.

Note: To be portable, applications must give the SQL type code and the fully-qualified SQL type name when specifying a NULL user-defined or REF parameter. In the case of a user-defined type the name is the type name of the parameter itself. For a REF parameter, the name is the type name of the referenced type. If a JDBC driver does not need the type code or type name information, it may ignore it. Although it is intended for user-defined and Ref parameters, this method may be used to set a null parameter of any JDBC type. If the parameter does not have a user-defined or REF type, the given typeName is ignored.

Parameters:
parameterName - the name of the parameter
sqlType - a value from java.sql.Types
typeName - the fully-qualified name of an SQL user-defined type; ignored if the parameter is not a user-defined type or SQL REF value
Throws:
SQLException - if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.4

setBoolean

void setBoolean(int parameterIndex,
                boolean x)
                throws SQLException
Sets the designated parameter in this RowSet object's command to the given Java boolean value. The driver converts this to an SQL BIT value before sending it to the database.

Parameters:
parameterIndex - the first parameter is 1, the second is 2, ...
x - the parameter value
Throws:
SQLException - if a database access error occurs

setBoolean

void setBoolean(String parameterName,
                boolean x)
                throws SQLException
Sets the designated parameter to the given Java boolean value. The driver converts this to an SQL BIT or BOOLEAN value when it sends it to the database.

Parameters:
parameterName - the name of the parameter
x - the parameter value
Throws:
SQLException - if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.4
See Also:
ResultSet.getBoolean(int)

setByte

void setByte(int parameterIndex,
             byte x)
             throws SQLException
Sets the designated parameter in this RowSet object's command to the given Java byte value. The driver converts this to an SQL TINYINT value before sending it to the database.

Parameters:
parameterIndex - the first parameter is 1, the second is 2, ...
x - the parameter value
Throws:
SQLException - if a database access error occurs

setByte

void setByte(String parameterName,
             byte x)
             throws SQLException
Sets the designated parameter to the given Java byte value. The driver converts this to an SQL TINYINT value when it sends it to the database.

Parameters:
parameterName - the name of the parameter
x - the parameter value
Throws:
SQLException - if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.4
See Also:
ResultSet.getByte(int)

setShort

void setShort(int parameterIndex,
              short x)
              throws SQLException
Sets the designated parameter in this RowSet object's command to the given Java short value. The driver converts this to an SQL SMALLINT value before sending it to the database.

Parameters:
parameterIndex - the first parameter is 1, the second is 2, ...
x - the parameter value
Throws:
SQLException - if a database access error occurs

setShort

void setShort(String parameterName,
              short x)
              throws SQLException
Sets the designated parameter to the given Java short value. The driver converts this to an SQL SMALLINT value when it sends it to the database.

Parameters:
parameterName - the name of the parameter
x - the parameter value
Throws:
SQLException - if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.4
See Also:
ResultSet.getShort(int)

setInt

void setInt(int parameterIndex,
            int x)
            throws SQLException
Sets the designated parameter in this RowSet object's command to the given Java int value. The driver converts this to an SQL INTEGER value before sending it to the database.

Parameters:
parameterIndex - the first parameter is 1, the second is 2, ...
x - the parameter value
Throws:
SQLException - if a database access error occurs

setInt

void setInt(String parameterName,
            int x)
            throws SQLException
Sets the designated parameter to the given Java int value. The driver converts this to an SQL INTEGER value when it sends it to the database.

Parameters:
parameterName - the name of the parameter
x - the parameter value
Throws:
SQLException - if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.4
See Also:
ResultSet.getInt(int)

setLong

void setLong(int parameterIndex,
             long x)
             throws SQLException
Sets the designated parameter in this RowSet object's command to the given Java long value. The driver converts this to an SQL BIGINT value before sending it to the database.

Parameters:
parameterIndex - the first parameter is 1, the second is 2, ...
x - the parameter value
Throws:
SQLException - if a database access error occurs

setLong

void setLong(String parameterName,
             long x)
             throws SQLException
Sets the designated parameter to the given Java long value. The driver converts this to an SQL BIGINT value when it sends it to the database.

Parameters:
parameterName - the name of the parameter
x - the parameter value
Throws:
SQLException - if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.4
See Also:
ResultSet.getLong(int)

setFloat

void setFloat(int parameterIndex,
              float x)
              throws SQLException
Sets the designated parameter in this RowSet object's command to the given Java float value. The driver converts this to an SQL REAL value before sending it to the database.

Parameters:
parameterIndex - the first parameter is 1, the second is 2, ...
x - the parameter value
Throws:
SQLException - if a database access error occurs

setFloat

void setFloat(String parameterName,
              float x)
              throws SQLException
Sets the designated parameter to the given Java float value. The driver converts this to an SQL FLOAT value when it sends it to the database.

Parameters:
parameterName - the name of the parameter
x - the parameter value
Throws:
SQLException - if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.4
See Also:
ResultSet.getFloat(int)

setDouble

void setDouble(int parameterIndex,
               double x)
               throws SQLException
Sets the designated parameter in this RowSet object's command to the given Java double value. The driver converts this to an SQL DOUBLE value before sending it to the database.

Parameters:
parameterIndex - the first parameter is 1, the second is 2, ...
x - the parameter value
Throws:
SQLException - if a database access error occurs

setDouble

void setDouble(String parameterName,
               double x)
               throws SQLException
Sets the designated parameter to the given Java double value. The driver converts this to an SQL DOUBLE value when it sends it to the database.

Parameters:
parameterName - the name of the parameter
x - the parameter value
Throws:
SQLException - if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.4
See Also:
ResultSet.getDouble(int)

setBigDecimal

void setBigDecimal(int parameterIndex,
                   BigDecimal x)
                   throws SQLException
Sets the designated parameter in this RowSet object's command to the given java.math.BigDeciaml value. The driver converts this to an SQL NUMERIC value before sending it to the database.

Parameters:
parameterIndex - the first parameter is 1, the second is 2, ...
x - the parameter value
Throws:
SQLException - if a database access error occurs

setBigDecimal

void setBigDecimal(String parameterName,
                   BigDecimal x)
                   throws SQLException
Sets the designated parameter to the given java.math.BigDecimal value. The driver converts this to an SQL NUMERIC value when it sends it to the database.

Parameters:
parameterName - the name of the parameter
x - the parameter value
Throws:
SQLException - if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.4
See Also:
ResultSet.getBigDecimal(int, int)

setString

void setString(int parameterIndex,
               String x)
               throws SQLException
Sets the designated parameter in this RowSet object's command to the given Java String value. Before sending it to the database, the driver converts this to an SQL VARCHAR or LONGVARCHAR value, depending on the argument's size relative to the driver's limits on VARCHAR values.

Parameters:
parameterIndex - the first parameter is 1, the second is 2, ...
x - the parameter value
Throws:
SQLException - if a database access error occurs

setString

void setString(String parameterName,
               String x)
               throws SQLException
Sets the designated parameter to the given Java String value. The driver converts this to an SQL VARCHAR or LONGVARCHAR value (depending on the argument's size relative to the driver's limits on VARCHAR values) when it sends it to the database.

Parameters:
parameterName - the name of the parameter
x - the parameter value
Throws:
SQLException - if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.4
See Also:
ResultSet.getString(int)

setBytes

void setBytes(int parameterIndex,
              byte[] x)
              throws SQLException
Sets the designated parameter in this RowSet object's command to the given Java array of byte values. Before sending it to the database, the driver converts this to an SQL VARBINARY or LONGVARBINARY value, depending on the argument's size relative to the driver's limits on VARBINARY values.

Parameters:
parameterIndex - the first parameter is 1, the second is 2, ...
x - the parameter value
Throws:
SQLException - if a database access error occurs

setBytes

void setBytes(String parameterName,
              byte[] x)
              throws SQLException
Sets the designated parameter to the given Java array of bytes. The driver converts this to an SQL VARBINARY or LONGVARBINARY (depending on the argument's size relative to the driver's limits on VARBINARY values) when it sends it to the database.

Parameters:
parameterName - the name of the parameter
x - the parameter value
Throws:
SQLException - if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.4
See Also:
ResultSet.getBytes(int)

setDate

void setDate(int parameterIndex,
             Date x)
             throws SQLException
Sets the designated parameter in this RowSet object's command to the given java.sql.Date value. The driver converts this to an SQL DATE value before sending it to the database, using the default java.util.Calendar to calculate the date.

Parameters:
parameterIndex - the first parameter is 1, the second is 2, ...
x - the parameter value
Throws:
SQLException - if a database access error occurs

setTime

void setTime(int parameterIndex,
             Time x)
             throws SQLException
Sets the designated parameter in this RowSet object's command to the given java.sql.Time value. The driver converts this to an SQL TIME value before sending it to the database, using the default java.util.Calendar to calculate it.

Parameters:
parameterIndex - the first parameter is 1, the second is 2, ...
x - the parameter value
Throws:
SQLException - if a database access error occurs

setTimestamp

void setTimestamp(int parameterIndex,
                  Timestamp x)
                  throws SQLException
Sets the designated parameter in this RowSet object's command to the given java.sql.Timestamp value. The driver converts this to an SQL TIMESTAMP value before sending it to the database, using the default java.util.Calendar to calculate it.

Parameters:
parameterIndex - the first parameter is 1, the second is 2, ...
x - the parameter value
Throws:
SQLException - if a database access error occurs

setTimestamp

void setTimestamp(String parameterName,
                  Timestamp x)
                  throws SQLException
Sets the designated parameter to the given java.sql.Timestamp value. The driver converts this to an SQL TIMESTAMP value when it sends it to the database.

Parameters:
parameterName - the name of the parameter
x - the parameter value
Throws:
SQLException - if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.4
See Also:
ResultSet.getTimestamp(int)

setAsciiStream

void setAsciiStream(int parameterIndex,
                    InputStream x,
                    int length)
                    throws SQLException
Sets the designated parameter in this RowSet object's command to the given java.io.InputStream value. It may be more practical to send a very large ASCII value via a java.io.InputStream rather than as a LONGVARCHAR parameter. The driver will read the data from the stream as needed until it reaches end-of-file.

Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

Parameters:
parameterIndex - the first parameter is 1, the second is 2, ...
x - the Java input stream that contains the ASCII parameter value
length - the number of bytes in the stream
Throws:
SQLException - if a database access error occurs

setAsciiStream

void setAsciiStream(String parameterName,
                    InputStream x,
                    int length)
                    throws SQLException
Sets the designated parameter to the given input stream, which will have the specified number of bytes. When a very large ASCII value is input to a LONGVARCHAR parameter, it may be more practical to send it via a java.io.InputStream. Data will be read from the stream as needed until end-of-file is reached. The JDBC driver will do any necessary conversion from ASCII to the database char format.

Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

Parameters:
parameterName - the name of the parameter
x - the Java input stream that contains the ASCII parameter value
length - the number of bytes in the stream
Throws:
SQLException - if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.4

setBinaryStream

void setBinaryStream(int parameterIndex,
                     InputStream x,
                     int length)
                     throws SQLException
Sets the designated parameter in this RowSet object's command to the given java.io.InputStream value. It may be more practical to send a very large binary value via a java.io.InputStream rather than as a LONGVARBINARY parameter. The driver will read the data from the stream as needed until it reaches end-of-file.

Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

Parameters:
parameterIndex - the first parameter is 1, the second is 2, ...
x - the java input stream which contains the binary parameter value
length - the number of bytes in the stream
Throws:
SQLException - if a database access error occurs

setBinaryStream

void setBinaryStream(String parameterName,
                     InputStream x,
                     int length)
                     throws SQLException
Sets the designated parameter to the given input stream, which will have the specified number of bytes. When a very large binary value is input to a LONGVARBINARY parameter, it may be more practical to send it via a java.io.InputStream object. The data will be read from the stream as needed until end-of-file is reached.

Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

Parameters:
parameterName - the name of the parameter
x - the java input stream which contains the binary parameter value
length - the number of bytes in the stream
Throws:
SQLException - if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.4

setCharacterStream

void setCharacterStream(int parameterIndex,
                        Reader reader,
                        int length)
                        throws SQLException
Sets the designated parameter in this RowSet object's command to the given java.io.Reader value. It may be more practical to send a very large UNICODE value via a java.io.Reader rather than as a LONGVARCHAR parameter. The driver will read the data from the stream as needed until it reaches end-of-file.

Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

Parameters:
parameterIndex - the first parameter is 1, the second is 2, ...
reader - the Reader object that contains the UNICODE data to be set
length - the number of characters in the stream
Throws:
SQLException - if a database access error occurs

setCharacterStream

void setCharacterStream(String parameterName,
                        Reader reader,
                        int length)
                        throws SQLException
Sets the designated parameter to the given Reader object, which is the given number of characters long. When a very large UNICODE value is input to a LONGVARCHAR parameter, it may be more practical to send it via a java.io.Reader object. The data will be read from the stream as needed until end-of-file is reached. The JDBC driver will do any necessary conversion from UNICODE to the database char format.

Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

Parameters:
parameterName - the name of the parameter
reader - the java.io.Reader object that contains the UNICODE data used as the designated parameter
length - the number of characters in the stream
Throws:
SQLException - if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.4

setAsciiStream

void setAsciiStream(int parameterIndex,
                    InputStream x)
                    throws SQLException
Sets the designated parameter in this RowSet object's command to the given input stream. When a very large ASCII value is input to a LONGVARCHAR parameter, it may be more practical to send it via a java.io.InputStream. Data will be read from the stream as needed until end-of-file is reached. The JDBC driver will do any necessary conversion from ASCII to the database char format.

Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setAsciiStream which takes a length parameter.

Parameters:
parameterIndex - the first parameter is 1, the second is 2, ...
x - the Java input stream that contains the ASCII parameter value
Throws:
SQLException - if a database access error occurs or this method is called on a closed PreparedStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.6

setAsciiStream

void setAsciiStream(String parameterName,
                    InputStream x)
                    throws SQLException
Sets the designated parameter to the given input stream. When a very large ASCII value is input to a LONGVARCHAR parameter, it may be more practical to send it via a java.io.InputStream. Data will be read from the stream as needed until end-of-file is reached. The JDBC driver will do any necessary conversion from ASCII to the database char format.

Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setAsciiStream which takes a length parameter.

Parameters:
parameterName - the name of the parameter
x - the Java input stream that contains the ASCII parameter value
Throws:
SQLException - if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.6

setBinaryStream

void setBinaryStream(int parameterIndex,
                     InputStream x)
                     throws SQLException
Sets the designated parameter in this RowSet object's command to the given input stream. When a very large binary value is input to a LONGVARBINARY parameter, it may be more practical to send it via a java.io.InputStream object. The data will be read from the stream as needed until end-of-file is reached.

Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setBinaryStream which takes a length parameter.

Parameters:
parameterIndex - the first parameter is 1, the second is 2, ...
x - the java input stream which contains the binary parameter value
Throws:
SQLException - if a database access error occurs or this method is called on a closed PreparedStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.6

setBinaryStream

void setBinaryStream(String parameterName,
                     InputStream x)
                     throws SQLException
Sets the designated parameter to the given input stream. When a very large binary value is input to a LONGVARBINARY parameter, it may be more practical to send it via a java.io.InputStream object. The data will be read from the stream as needed until end-of-file is reached.

Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setBinaryStream which takes a length parameter.

Parameters:
parameterName - the name of the parameter
x - the java input stream which contains the binary parameter value
Throws:
SQLException - if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.6

setCharacterStream

void setCharacterStream(int parameterIndex,
                        Reader reader)
                        throws SQLException
Sets the designated parameter in this RowSet object's command to the given Reader object. When a very large UNICODE value is input to a LONGVARCHAR parameter, it may be more practical to send it via a java.io.Reader object. The data will be read from the stream as needed until end-of-file is reached. The JDBC driver will do any necessary conversion from UNICODE to the database char format.

Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setCharacterStream which takes a length parameter.

Parameters:
parameterIndex - the first parameter is 1, the second is 2, ...
reader - the java.io.Reader object that contains the Unicode data
Throws:
SQLException - if a database access error occurs or this method is called on a closed PreparedStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.6

setCharacterStream

void setCharacterStream(String parameterName,
                        Reader reader)
                        throws SQLException
Sets the designated parameter to the given Reader object. When a very large UNICODE value is input to a LONGVARCHAR parameter, it may be more practical to send it via a java.io.Reader object. The data will be read from the stream as needed until end-of-file is reached. The JDBC driver will do any necessary conversion from UNICODE to the database char format.

Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setCharacterStream which takes a length parameter.

Parameters:
parameterName - the name of the parameter
reader - the java.io.Reader object that contains the Unicode data
Throws:
SQLException - if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.6

setNCharacterStream

void setNCharacterStream(int parameterIndex,
                         Reader value)
                         throws SQLException
Sets the designated parameter in this RowSet object's command to a Reader object. The Reader reads the data till end-of-file is reached. The driver does the necessary conversion from Java character format to the national character set in the database.

Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setNCharacterStream which takes a length parameter.

Parameters:
parameterIndex - of the first parameter is 1, the second is 2, ...
value - the parameter value
Throws:
SQLException - if the driver does not support national character sets; if the driver can detect that a data conversion error could occur ; if a database access error occurs; or this method is called on a closed PreparedStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.6

setObject

void setObject(int parameterIndex,
               Object x,
               int targetSqlType,
               int scaleOrLength)
               throws SQLException
Sets the designated parameter in this RowSet object's command with the given Java Object. For integral values, the java.lang equivalent objects should be used (for example, an instance of the class Integer for an int). If the second argument is an InputStream then the stream must contain the number of bytes specified by scaleOrLength. If the second argument is a Reader then the reader must contain the number of characters specified * by scaleOrLength. If these conditions are not true the driver will generate a SQLException when the prepared statement is executed.

The given Java object will be converted to the targetSqlType before being sent to the database.

If the object is of a class implementing SQLData, the rowset should call the method SQLData.writeSQL to write the object to an SQLOutput data stream. If, on the other hand, the object is of a class implementing Ref, Blob, Clob, NClob, Struct, java.net.URL, or Array, the driver should pass it to the database as a value of the corresponding SQL type.

Note that this method may be used to pass datatabase-specific abstract data types.

Parameters:
parameterIndex - the first parameter is 1, the second is 2, ...
x - the object containing the input parameter value
targetSqlType - the SQL type (as defined in java.sql.Types) to be sent to the database. The scale argument may further qualify this type.
scaleOrLength - for java.sql.Types.DECIMAL or java.sql.Types.NUMERIC types, this is the number of digits after the decimal point. For Java Object types InputStream and Reader, this is the length of the data in the stream or reader. For all other types, this value will be ignored.
Throws:
SQLException - if a database access error occurs
See Also:
Types

setObject

void setObject(String parameterName,
               Object x,
               int targetSqlType,
               int scale)
               throws SQLException
Sets the value of the designated parameter with the given object. The second argument must be an object type; for integral values, the java.lang equivalent objects should be used.

The given Java object will be converted to the given targetSqlType before being sent to the database. If the object has a custom mapping (is of a class implementing the interface SQLData), the JDBC driver should call the method SQLData.writeSQL to write it to the SQL data stream. If, on the other hand, the object is of a class implementing Ref, Blob, Clob, NClob, Struct, java.net.URL, or Array, the driver should pass it to the database as a value of the corresponding SQL type.

Note that this method may be used to pass datatabase- specific abstract data types.

Parameters:
parameterName - the name of the parameter
x - the object containing the input parameter value
targetSqlType - the SQL type (as defined in java.sql.Types) to be sent to the database. The scale argument may further qualify this type.
scale - for java.sql.Types.DECIMAL or java.sql.Types.NUMERIC types, this is the number of digits after the decimal point. For all other types, this value will be ignored.
Throws:
SQLException - if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if targetSqlType is a ARRAY, BLOB, CLOB, DATALINK, JAVA_OBJECT, NCHAR, NCLOB, NVARCHAR, LONGNVARCHAR, REF, ROWID, SQLXML or STRUCT data type and the JDBC driver does not support this data type
Since:
1.4
See Also:
Types, ResultSet.getObject(int)

setObject

void setObject(int parameterIndex,
               Object x,
               int targetSqlType)
               throws SQLException
Sets the designated parameter in this RowSet object's command with a Java Object. For integral values, the java.lang equivalent objects should be used. This method is like setObject above, but the scale used is the scale of the second parameter. Scalar values have a scale of zero. Literal values have the scale present in the literal.

Even though it is supported, it is not recommended that this method be called with floating point input values.

Parameters:
parameterIndex - the first parameter is 1, the second is 2, ...
x - the object containing the input parameter value
targetSqlType - the SQL type (as defined in java.sql.Types) to be sent to the database
Throws:
SQLException - if a database access error occurs

setObject

void setObject(String parameterName,
               Object x,
               int targetSqlType)
               throws SQLException
Sets the value of the designated parameter with the given object. This method is like the method setObject above, except that it assumes a scale of zero.

Parameters:
parameterName - the name of the parameter
x - the object containing the input parameter value
targetSqlType - the SQL type (as defined in java.sql.Types) to be sent to the database
Throws:
SQLException - if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if targetSqlType is a ARRAY, BLOB, CLOB, DATALINK, JAVA_OBJECT, NCHAR, NCLOB, NVARCHAR, LONGNVARCHAR, REF, ROWID, SQLXML or STRUCT data type and the JDBC driver does not support this data type
Since:
1.4
See Also:
ResultSet.getObject(int)

setObject

void setObject(String parameterName,
               Object x)
               throws SQLException
Sets the value of the designated parameter with the given object. The second parameter must be of type Object; therefore, the java.lang equivalent objects should be used for built-in types.

The JDBC specification specifies a standard mapping from Java Object types to SQL types. The given argument will be converted to the corresponding SQL type before being sent to the database.

Note that this method may be used to pass datatabase- specific abstract data types, by using a driver-specific Java type. If the object is of a class implementing the interface SQLData, the JDBC driver should call the method SQLData.writeSQL to write it to the SQL data stream. If, on the other hand, the object is of a class implementing Ref, Blob, Clob, NClob, Struct, java.net.URL, or Array, the driver should pass it to the database as a value of the corresponding SQL type.

This method throws an exception if there is an ambiguity, for example, if the object is of a class implementing more than one of the interfaces named above.

Parameters:
parameterName - the name of the parameter
x - the object containing the input parameter value
Throws:
SQLException - if a database access error occurs, this method is called on a closed CallableStatement or if the given Object parameter is ambiguous
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.4
See Also:
ResultSet.getObject(int)

setObject

void setObject(int parameterIndex,
               Object x)
               throws SQLException
Sets the designated parameter in this RowSet object's command with a Java Object. For integral values, the java.lang equivalent objects should be used.

The JDBC specification provides a standard mapping from Java Object types to SQL types. The driver will convert the given Java object to its standard SQL mapping before sending it to the database.

Note that this method may be used to pass datatabase-specific abstract data types by using a driver-specific Java type. If the object is of a class implementing SQLData, the rowset should call the method SQLData.writeSQL to write the object to an SQLOutput data stream. If, on the other hand, the object is of a class implementing Ref, Blob, Clob, NClob, Struct, java.net.URL, or Array, the driver should pass it to the database as a value of the corresponding SQL type.

An exception is thrown if there is an ambiguity, for example, if the object is of a class implementing more than one of these interfaces.

Parameters:
parameterIndex - The first parameter is 1, the second is 2, ...
x - The object containing the input parameter value
Throws:
SQLException - if a database access error occurs

setRef

void setRef(int i,
            Ref x)
            throws SQLException
Sets the designated parameter in this RowSet object's command with the given Ref value. The driver will convert this to the appropriate REF(<structured-type>) value.

Parameters:
i - the first parameter is 1, the second is 2, ...
x - an object representing data of an SQL REF type
Throws:
SQLException - if a database access error occurs

setBlob

void setBlob(int i,
             Blob x)
             throws SQLException
Sets the designated parameter in this RowSet object's command with the given Blob value. The driver will convert this to the BLOB value that the Blob object represents before sending it to the database.

Parameters:
i - the first parameter is 1, the second is 2, ...
x - an object representing a BLOB
Throws:
SQLException - if a database access error occurs

setBlob

void setBlob(int parameterIndex,
             InputStream inputStream,
             long length)
             throws SQLException
Sets the designated parameter to a InputStream object. The inputstream must contain the number of characters specified by length otherwise a SQLException will be generated when the PreparedStatement is executed. This method differs from the setBinaryStream (int, InputStream, int) method because it informs the driver that the parameter value should be sent to the server as a BLOB. When the setBinaryStream method is used, the driver may have to do extra work to determine whether the parameter data should be sent to the server as a LONGVARBINARY or a BLOB

Parameters:
parameterIndex - index of the first parameter is 1, the second is 2, ...
inputStream - An object that contains the data to set the parameter value to.
length - the number of bytes in the parameter data.
Throws:
SQLException - if a database access error occurs, this method is called on a closed PreparedStatement, if parameterIndex does not correspond to a parameter marker in the SQL statement, if the length specified is less than zero or if the number of bytes in the inputstream does not match the specfied length.
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.6

setBlob

void setBlob(int parameterIndex,
             InputStream inputStream)
             throws SQLException
Sets the designated parameter to a InputStream object. This method differs from the setBinaryStream (int, InputStream) method because it informs the driver that the parameter value should be sent to the server as a BLOB. When the setBinaryStream method is used, the driver may have to do extra work to determine whether the parameter data should be sent to the server as a LONGVARBINARY or a BLOB

Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setBlob which takes a length parameter.

Parameters:
parameterIndex - index of the first parameter is 1, the second is 2, ...
inputStream - An object that contains the data to set the parameter value to.
Throws:
SQLException - if a database access error occurs, this method is called on a closed PreparedStatement or if parameterIndex does not correspond to a parameter marker in the SQL statement,
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.6

setBlob

void setBlob(String parameterName,
             InputStream inputStream,
             long length)
             throws SQLException
Sets the designated parameter to a InputStream object. The inputstream must contain the number of characters specified by length, otherwise a SQLException will be generated when the CallableStatement is executed. This method differs from the setBinaryStream (int, InputStream, int) method because it informs the driver that the parameter value should be sent to the server as a BLOB. When the setBinaryStream method is used, the driver may have to do extra work to determine whether the parameter data should be sent to the server as a LONGVARBINARY or a BLOB

Parameters:
parameterName - the name of the parameter to be set the second is 2, ...
inputStream - An object that contains the data to set the parameter value to.
length - the number of bytes in the parameter data.
Throws:
SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement, or if the length specified is less than zero; if the number of bytes in the inputstream does not match the specfied length; if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.6

setBlob

void setBlob(String parameterName,
             Blob x)
             throws SQLException
Sets the designated parameter to the given java.sql.Blob object. The driver converts this to an SQL BLOB value when it sends it to the database.

Parameters:
parameterName - the name of the parameter
x - a Blob object that maps an SQL BLOB value
Throws:
SQLException - if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.6

setBlob

void setBlob(String parameterName,
             InputStream inputStream)
             throws SQLException
Sets the designated parameter to a InputStream object. This method differs from the setBinaryStream (int, InputStream) method because it informs the driver that the parameter value should be sent to the server as a BLOB. When the setBinaryStream method is used, the driver may have to do extra work to determine whether the parameter data should be send to the server as a LONGVARBINARY or a BLOB

Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setBlob which takes a length parameter.

Parameters:
parameterName - the name of the parameter
inputStream - An object that contains the data to set the parameter value to.
Throws:
SQLException - if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.6

setClob

void setClob(int i,
             Clob x)
             throws SQLException
Sets the designated parameter in this RowSet object's command with the given Clob value. The driver will convert this to the CLOB value that the Clob object represents before sending it to the database.

Parameters:
i - the first parameter is 1, the second is 2, ...
x - an object representing a CLOB
Throws:
SQLException - if a database access error occurs

setClob

void setClob(int parameterIndex,
             Reader reader,
             long length)
             throws SQLException
Sets the designated parameter to a Reader object. The reader must contain the number of characters specified by length otherwise a SQLException will be generated when the PreparedStatement is executed. This method differs from the setCharacterStream (int, Reader, int) method because it informs the driver that the parameter value should be sent to the server as a CLOB. When the setCharacterStream method is used, the driver may have to do extra work to determine whether the parameter data should be sent to the server as a LONGVARCHAR or a CLOB

Parameters:
parameterIndex - index of the first parameter is 1, the second is 2, ...
reader - An object that contains the data to set the parameter value to.
length - the number of characters in the parameter data.
Throws:
SQLException - if a database access error occurs, this method is called on a closed PreparedStatement, if parameterIndex does not correspond to a parameter marker in the SQL statement, or if the length specified is less than zero.
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.6

setClob

void setClob(int parameterIndex,
             Reader reader)
             throws SQLException
Sets the designated parameter to a Reader object. This method differs from the setCharacterStream (int, Reader) method because it informs the driver that the parameter value should be sent to the server as a CLOB. When the setCharacterStream method is used, the driver may have to do extra work to determine whether the parameter data should be sent to the server as a LONGVARCHAR or a CLOB

Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setClob which takes a length parameter.

Parameters:
parameterIndex - index of the first parameter is 1, the second is 2, ...
reader - An object that contains the data to set the parameter value to.
Throws:
SQLException - if a database access error occurs, this method is called on a closed PreparedStatementor if parameterIndex does not correspond to a parameter marker in the SQL statement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.6

setClob

void setClob(String parameterName,
             Reader reader,
             long length)
             throws SQLException
Sets the designated parameter to a Reader object. The reader must contain the number of characters specified by length otherwise a SQLException will be generated when the CallableStatement is executed. This method differs from the setCharacterStream (int, Reader, int) method because it informs the driver that the parameter value should be sent to the server as a CLOB. When the setCharacterStream method is used, the driver may have to do extra work to determine whether the parameter data should be send to the server as a LONGVARCHAR or a CLOB

Parameters:
parameterName - the name of the parameter to be set
reader - An object that contains the data to set the parameter value to.
length - the number of characters in the parameter data.
Throws:
SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if the length specified is less than zero; a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.6

setClob

void setClob(String parameterName,
             Clob x)
             throws SQLException
Sets the designated parameter to the given java.sql.Clob object. The driver converts this to an SQL CLOB value when it sends it to the database.

Parameters:
parameterName - the name of the parameter
x - a Clob object that maps an SQL CLOB value
Throws:
SQLException - if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.6

setClob

void setClob(String parameterName,
             Reader reader)
             throws SQLException
Sets the designated parameter to a Reader object. This method differs from the setCharacterStream (int, Reader) method because it informs the driver that the parameter value should be sent to the server as a CLOB. When the setCharacterStream method is used, the driver may have to do extra work to determine whether the parameter data should be send to the server as a LONGVARCHAR or a CLOB

Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setClob which takes a length parameter.

Parameters:
parameterName - the name of the parameter
reader - An object that contains the data to set the parameter value to.
Throws:
SQLException - if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.6

setArray

void setArray(int i,
              Array x)
              throws SQLException
Sets the designated parameter in this RowSet object's command with the given Array value. The driver will convert this to the ARRAY value that the Array object represents before sending it to the database.

Parameters:
i - the first parameter is 1, the second is 2, ...
x - an object representing an SQL array
Throws:
SQLException - if a database access error occurs

setDate

void setDate(int parameterIndex,
             Date x,
             Calendar cal)
             throws SQLException
Sets the designated parameter in this RowSet object's command with the given java.sql.Date value. The driver will convert this to an SQL DATE value, using the given java.util.Calendar object to calculate the date.

Parameters:
parameterIndex - the first parameter is 1, the second is 2, ...
x - the parameter value
cal - the java.util.Calendar object to use for calculating the date
Throws:
SQLException - if a database access error occurs

setDate

void setDate(String parameterName,
             Date x)
             throws SQLException
Sets the designated parameter to the given java.sql.Date value using the default time zone of the virtual machine that is running the application. The driver converts this to an SQL DATE value when it sends it to the database.

Parameters:
parameterName - the name of the parameter
x - the parameter value
Throws:
SQLException - if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.4
See Also:
ResultSet.getDate(int)

setDate

void setDate(String parameterName,
             Date x,
             Calendar cal)
             throws SQLException
Sets the designated parameter to the given java.sql.Date value, using the given Calendar object. The driver uses the Calendar object to construct an SQL DATE value, which the driver then sends to the database. With a a Calendar object, the driver can calculate the date taking into account a custom timezone. If no Calendar object is specified, the driver uses the default timezone, which is that of the virtual machine running the application.

Parameters:
parameterName - the name of the parameter
x - the parameter value
cal - the Calendar object the driver will use to construct the date
Throws:
SQLException - if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.4
See Also:
ResultSet.getDate(int)

setTime

void setTime(int parameterIndex,
             Time x,
             Calendar cal)
             throws SQLException
Sets the designated parameter in this RowSet object's command with the given java.sql.Time value. The driver will convert this to an SQL TIME value, using the given java.util.Calendar object to calculate it, before sending it to the database.

Parameters:
parameterIndex - the first parameter is 1, the second is 2, ...
x - the parameter value
cal - the java.util.Calendar object to use for calculating the time
Throws:
SQLException - if a database access error occurs

setTime

void setTime(String parameterName,
             Time x)
             throws SQLException
Sets the designated parameter to the given java.sql.Time value. The driver converts this to an SQL TIME value when it sends it to the database.

Parameters:
parameterName - the name of the parameter
x - the parameter value
Throws:
SQLException - if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.4
See Also:
ResultSet.getTime(int)

setTime

void setTime(String parameterName,
             Time x,
             Calendar cal)
             throws SQLException
Sets the designated parameter to the given java.sql.Time value, using the given Calendar object. The driver uses the Calendar object to construct an SQL TIME value, which the driver then sends to the database. With a a Calendar object, the driver can calculate the time taking into account a custom timezone. If no Calendar object is specified, the driver uses the default timezone, which is that of the virtual machine running the application.

Parameters:
parameterName - the name of the parameter
x - the parameter value
cal - the Calendar object the driver will use to construct the time
Throws:
SQLException - if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.4
See Also:
ResultSet.getTime(int)

setTimestamp

void setTimestamp(int parameterIndex,
                  Timestamp x,
                  Calendar cal)
                  throws SQLException
Sets the designated parameter in this RowSet object's command with the given java.sql.Timestamp value. The driver will convert this to an SQL TIMESTAMP value, using the given java.util.Calendar object to calculate it, before sending it to the database.

Parameters:
parameterIndex - the first parameter is 1, the second is 2, ...
x - the parameter value
cal - the java.util.Calendar object to use for calculating the timestamp
Throws:
SQLException - if a database access error occurs

setTimestamp

void setTimestamp(String parameterName,
                  Timestamp x,
                  Calendar cal)
                  throws SQLException
Sets the designated parameter to the given java.sql.Timestamp value, using the given Calendar object. The driver uses the Calendar object to construct an SQL TIMESTAMP value, which the driver then sends to the database. With a a Calendar object, the driver can calculate the timestamp taking into account a custom timezone. If no Calendar object is specified, the driver uses the default timezone, which is that of the virtual machine running the application.

Parameters:
parameterName - the name of the parameter
x - the parameter value
cal - the Calendar object the driver will use to construct the timestamp
Throws:
SQLException - if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.4
See Also:
ResultSet.getTimestamp(int)

clearParameters

void clearParameters()
                     throws SQLException
Clears the parameters set for this RowSet object's command.

In general, parameter values remain in force for repeated use of a RowSet object. Setting a parameter value automatically clears its previous value. However, in some cases it is useful to immediately release the resources used by the current parameter values, which can be done by calling the method clearParameters.

Throws:
SQLException - if a database access error occurs

execute

void execute()
             throws SQLException
Fills this RowSet object with data.

The execute method may use the following properties to create a connection for reading data: url, data source name, user name, password, transaction isolation, and type map. The execute method may use the following properties to create a statement to execute a command: command, read only, maximum field size, maximum rows, escape processing, and query timeout.

If the required properties have not been set, an exception is thrown. If this method is successful, the current contents of the rowset are discarded and the rowset's metadata is also (re)set. If there are outstanding updates, they are ignored.

If this RowSet object does not maintain a continuous connection with its source of data, it may use a reader (a RowSetReader object) to fill itself with data. In this case, a reader will have been registered with this RowSet object, and the method execute will call on the reader's readData method as part of its implementation.

Throws:
SQLException - if a database access error occurs or any of the properties necessary for making a connection and creating a statement have not been set

addRowSetListener

void addRowSetListener(RowSetListener listener)
Registers the given listener so that it will be notified of events that occur on this RowSet object.

Parameters:
listener - a component that has implemented the RowSetListener interface and wants to be notified when events occur on this RowSet object
See Also:
removeRowSetListener(javax.sql.RowSetListener)

removeRowSetListener

void removeRowSetListener(RowSetListener listener)
Removes the specified listener from the list of components that will be notified when an event occurs on this RowSet object.

Parameters:
listener - a component that has been registered as a listener for this RowSet object
See Also:
addRowSetListener(javax.sql.RowSetListener)

setSQLXML

void setSQLXML(int parameterIndex,
               SQLXML xmlObject)
               throws SQLException
Sets the designated parameter to the given java.sql.SQLXML object. The driver converts this to an SQL XML value when it sends it to the database.

Parameters:
parameterIndex - index of the first parameter is 1, the second is 2, ...
xmlObject - a SQLXML object that maps an SQL XML value
Throws:
SQLException - if a database access error occurs, this method is called on a closed result set, the java.xml.transform.Result, Writer or OutputStream has not been closed for the SQLXML object or if there is an error processing the XML value. The getCause method of the exception may provide a more detailed exception, for example, if the stream does not contain valid XML.
Since:
1.6

setSQLXML

void setSQLXML(String parameterName,
               SQLXML xmlObject)
               throws SQLException
Sets the designated parameter to the given java.sql.SQLXML object. The driver converts this to an SQL XML value when it sends it to the database.

Parameters:
parameterName - the name of the parameter
xmlObject - a SQLXML object that maps an SQL XML value
Throws:
SQLException - if a database access error occurs, this method is called on a closed result set, the java.xml.transform.Result, Writer or OutputStream has not been closed for the SQLXML object or if there is an error processing the XML value. The getCause method of the exception may provide a more detailed exception, for example, if the stream does not contain valid XML.
Since:
1.6

setRowId

void setRowId(int parameterIndex,
              RowId x)
              throws SQLException
Sets the designated parameter to the given java.sql.RowId object. The driver converts this to a SQL ROWID value when it sends it to the database

Parameters:
parameterIndex - the first parameter is 1, the second is 2, ...
x - the parameter value
Throws:
SQLException - if a database access error occurs
Since:
1.6

setRowId

void setRowId(String parameterName,
              RowId x)
              throws SQLException
Sets the designated parameter to the given java.sql.RowId object. The driver converts this to a SQL ROWID when it sends it to the database.

Parameters:
parameterName - the name of the parameter
x - the parameter value
Throws:
SQLException - if a database access error occurs
Since:
1.6

setNString

void setNString(int parameterIndex,
                String value)
                throws SQLException
Sets the designated paramter to the given String object. The driver converts this to a SQL NCHAR or NVARCHAR or LONGNVARCHAR value (depending on the argument's size relative to the driver's limits on NVARCHAR values) when it sends it to the database.

Parameters:
parameterIndex - of the first parameter is 1, the second is 2, ...
value - the parameter value
Throws:
SQLException - if the driver does not support national character sets; if the driver can detect that a data conversion error could occur ; or if a database access error occurs
Since:
1.6

setNString

void setNString(String parameterName,
                String value)
                throws SQLException
Sets the designated paramter to the given String object. The driver converts this to a SQL NCHAR or NVARCHAR or LONGNVARCHAR

Parameters:
parameterName - the name of the column to be set
value - the parameter value
Throws:
SQLException - if the driver does not support national character sets; if the driver can detect that a data conversion error could occur; or if a database access error occurs
Since:
1.6

setNCharacterStream

void setNCharacterStream(int parameterIndex,
                         Reader value,
                         long length)
                         throws SQLException
Sets the designated parameter to a Reader object. The Reader reads the data till end-of-file is reached. The driver does the necessary conversion from Java character format to the national character set in the database.

Parameters:
parameterIndex - of the first parameter is 1, the second is 2, ...
value - the parameter value
length - the number of characters in the parameter data.
Throws:
SQLException - if the driver does not support national character sets; if the driver can detect that a data conversion error could occur ; or if a database access error occurs
Since:
1.6

setNCharacterStream

void setNCharacterStream(String parameterName,
                         Reader value,
                         long length)
                         throws SQLException
Sets the designated parameter to a Reader object. The Reader reads the data till end-of-file is reached. The driver does the necessary conversion from Java character format to the national character set in the database.

Parameters:
parameterName - the name of the column to be set
value - the parameter value
length - the number of characters in the parameter data.
Throws:
SQLException - if the driver does not support national character sets; if the driver can detect that a data conversion error could occur; or if a database access error occurs
Since:
1.6

setNCharacterStream

void setNCharacterStream(String parameterName,
                         Reader value)
                         throws SQLException
Sets the designated parameter to a Reader object. The Reader reads the data till end-of-file is reached. The driver does the necessary conversion from Java character format to the national character set in the database.

Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setNCharacterStream which takes a length parameter.

Parameters:
parameterName - the name of the parameter
value - the parameter value
Throws:
SQLException - if the driver does not support national character sets; if the driver can detect that a data conversion error could occur ; if a database access error occurs; or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.6

setNClob

void setNClob(String parameterName,
              NClob value)
              throws SQLException
Sets the designated parameter to a java.sql.NClob object. The object implements the java.sql.NClob interface. This NClob object maps to a SQL NCLOB.

Parameters:
parameterName - the name of the column to be set
value - the parameter value
Throws:
SQLException - if the driver does not support national character sets; if the driver can detect that a data conversion error could occur; or if a database access error occurs
Since:
1.6

setNClob

void setNClob(String parameterName,
              Reader reader,
              long length)
              throws SQLException
Sets the designated parameter to a Reader object. The reader must contain the number of characters specified by length otherwise a SQLException will be generated when the CallableStatement is executed. This method differs from the setCharacterStream (int, Reader, int) method because it informs the driver that the parameter value should be sent to the server as a NCLOB. When the setCharacterStream method is used, the driver may have to do extra work to determine whether the parameter data should be send to the server as a LONGNVARCHAR or a NCLOB

Parameters:
parameterName - the name of the parameter to be set
reader - An object that contains the data to set the parameter value to.
length - the number of characters in the parameter data.
Throws:
SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if the length specified is less than zero; if the driver does not support national character sets; if the driver can detect that a data conversion error could occur; if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.6

setNClob

void setNClob(String parameterName,
              Reader reader)
              throws SQLException
Sets the designated parameter to a Reader object. This method differs from the setCharacterStream (int, Reader) method because it informs the driver that the parameter value should be sent to the server as a NCLOB. When the setCharacterStream method is used, the driver may have to do extra work to determine whether the parameter data should be send to the server as a LONGNVARCHAR or a NCLOB

Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setNClob which takes a length parameter.

Parameters:
parameterName - the name of the parameter
reader - An object that contains the data to set the parameter value to.
Throws:
SQLException - if the driver does not support national character sets; if the driver can detect that a data conversion error could occur; if a database access error occurs or this method is called on a closed CallableStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.6

setNClob

void setNClob(int parameterIndex,
              Reader reader,
              long length)
              throws SQLException
Sets the designated parameter to a Reader object. The reader must contain the number of characters specified by length otherwise a SQLException will be generated when the PreparedStatement is executed. This method differs from the setCharacterStream (int, Reader, int) method because it informs the driver that the parameter value should be sent to the server as a NCLOB. When the setCharacterStream method is used, the driver may have to do extra work to determine whether the parameter data should be sent to the server as a LONGNVARCHAR or a NCLOB

Parameters:
parameterIndex - index of the first parameter is 1, the second is 2, ...
reader - An object that contains the data to set the parameter value to.
length - the number of characters in the parameter data.
Throws:
SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if the length specified is less than zero; if the driver does not support national character sets; if the driver can detect that a data conversion error could occur; if a database access error occurs or this method is called on a closed PreparedStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.6

setNClob

void setNClob(int parameterIndex,
              NClob value)
              throws SQLException
Sets the designated parameter to a java.sql.NClob object. The driver converts this to a SQL NCLOB value when it sends it to the database.

Parameters:
parameterIndex - of the first parameter is 1, the second is 2, ...
value - the parameter value
Throws:
SQLException - if the driver does not support national character sets; if the driver can detect that a data conversion error could occur ; or if a database access error occurs
Since:
1.6

setNClob

void setNClob(int parameterIndex,
              Reader reader)
              throws SQLException
Sets the designated parameter to a Reader object. This method differs from the setCharacterStream (int, Reader) method because it informs the driver that the parameter value should be sent to the server as a NCLOB. When the setCharacterStream method is used, the driver may have to do extra work to determine whether the parameter data should be sent to the server as a LONGNVARCHAR or a NCLOB

Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setNClob which takes a length parameter.

Parameters:
parameterIndex - index of the first parameter is 1, the second is 2, ...
reader - An object that contains the data to set the parameter value to.
Throws:
SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if the driver does not support national character sets; if the driver can detect that a data conversion error could occur; if a database access error occurs or this method is called on a closed PreparedStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.6

setURL

void setURL(int parameterIndex,
            URL x)
            throws SQLException
Sets the designated parameter to the given java.net.URL value. The driver converts this to an SQL DATALINK value when it sends it to the database.

Parameters:
parameterIndex - the first parameter is 1, the second is 2, ...
x - the java.net.URL object to be set
Throws:
SQLException - if a database access error occurs or this method is called on a closed PreparedStatement
SQLFeatureNotSupportedException - if the JDBC driver does not support this method
Since:
1.4

Java™ Platform
Standard Ed. 6

Submit a bug or feature
For further API reference and developer documentation, see Java SE Developer Documentation. That documentation contains more detailed, developer-targeted descriptions, with conceptual overviews, definitions of terms, workarounds, and working code examples.

Copyright © 1993, 2011, Oracle and/or its affiliates. All rights reserved.